Originally Posted by metalracer2

i can get it to work right but this is what it is
Front
Toe: 1out
Ride height: 5mm
Caster: 4
Droop: 3
Roll Center: high
Arm Spacing: middle
Shock Position: 2
Steering Rack: 2 no washer
Spindle: 1 no washer
Camber link: 1 ball stud lois long
Sway bar: .040
Arm length: long
Spool 41 high, lcd, Hex .165 stk
Shocks
45 losi, 56 piston black bladder, spring 17.5

Rear
Toe: 2
Ride height: 5mm
Camber: -2
Anti Squat: .030
Std Hub
Rear pivot 1 degree
Roll center low
Arm spacing; short
Shock position: 2 outside
Camber link: 7B standard ball stud
Say Bar: .030
Long arm
Diff high, rcd, hex .165stk
Shocks
40 lois, spring 15, black bladder