Originally Posted by
Team Kamikaze
Si Roelof ang huwag mong pansinin, dahil contra siya sa lahat ng bagay, ganoon talaga ang "BAKLA"
Can someone translate this, I doubt it is something good about me.
Dear Sam, this is not helping you....
Originally Posted by
SalvadoriRacing
believe me, I'm Novarossi distributor in Brazil........
Conrods R7, C1, C2, P1 & P3 cost exactly the same, theres no one cent of difference...........I think your supplier is making money from the small pin rods
The Flash .21 uses the R7 rod, the shaft is basically the same as 35 Plus, 9 port with nothing really new, Collari carburettor (double adjusting and thermal insulator)..........still got to see if the exhaust port is like 35 PLUS, or slightly higher as we see on Collari and 359.........
The C-rods are 10 euro more expensive, I know the distributor is making the prices so he was taking a part. I mentioned "was" because for 2 months there is a new distributor here in Holland and I have to see what he will do with the prices.
Its a good thing the Flash is using the R7 again, they must have learned from the C-rods.
Regarding the exhaust. between the old 35-plus and my latest JP R9 there was about 1.5 mm difference Even between 2 JP's I have seen 0.3mm difference.