Originally Posted by
DANE_TRAIN
I have a tekin g-11 with an orion v2 12x2 motor. When fastly pulling the throttle to full, my spektrum temporarily looses bind and goes to failsafe (only for a slit second). If I pull on it slowly its fine. I've tried to adjust the current limiter, with no luck. Do I need a capacitor somewhere? Maybe my jucker batts are causing the problem?
Yeah, try the Spektrum Voltage Protector, SPM1600. With the older Tekin ESC's I had to run one as the BEC voltage was a little on the low side. I realize the G-11 isn't "old-old", like maybe a G-12C but it's still based on the G-10 Pro.