Originally Posted by
beers4evo
when you put the spur gears on are they suppose to spin freely (newly built rrr evo2 kit) ? mine seem to be binding...once i loosen the screw that secures the spurs on the right (looking from the rear) 2nd gear spins fine...
if there is no engine installed the second spur should spin free both ways but the first spur should only spin freely in one direction and should activate the one way bearing in the opposite direction engaging your drive train. some times if your 2 speed shaft is not installed properly and the spacing is not correct on ya 2 speed shoe holder, then the collar that spaces the one way bearing and the first gear holder need to be shimmed .if i am understanding ur problem right, i think in your case you need to back off the 2 speed shoe holder on the shaft . see how that goes.
also if you use msn messenger you can get me on
[email protected]
cheers
alex