R40 2 speed settings
OK I'm having a bit of trouble getting my 2 speed to engage (or noticeing when it does engage) I have everything set per the instructions, and as we all know the instructions are a bit lacking.
I have the the ball bearing tightend down to leave a slight gap between the shoes and the spring loaded bolt out to about 5.5 turns from seated.
I'm running the stock gearing with the stock foams with a MT-12 for the powerplant with RDLogics onepeice pipe.
I'm pretty sure it's not kickin in cause my .26 powered savage can out run my R40 that should not happen.