R/C Tech Forums - View Single Post - Inexpensive Servo?
Thread: Inexpensive Servo?
View Single Post
Old 02-04-2009 | 08:46 AM
  #4  
SteveM
Tech Champion
iTrader: (165)
 
Joined: Aug 2001
Posts: 7,664
Default
The power output on that servo seems very low at only 38 oz/in @ 4.8V or 43 oz/in @ 6.0V The HS-925MG has 85 oz/in @ 4.8V and 107 oz/in @ 6.0V

Speeds for the two servos are virtually the same.
SteveM is offline  
Reply