R/C Tech Forums - View Single Post - XRAY T2’009
Thread: XRAY T2’009
View Single Post
Old 01-25-2009, 10:33 PM
  #434  
pcar951
Tech Master
iTrader: (23)
 
Join Date: Dec 2005
Location: Cow Town
Posts: 1,746
Trader Rating: 23 (100%+)
Default

Originally Posted by Skiddins
Asphalt Top Deck

FRNT:
0 toe out
4 degrees castor
high roll center
1.6 sway
3 holes in upper shock mount
40wt oil
2.8 springs
1 camber
1mm shim at c hub
Upper inside camber link mount
ackerman 2 or 3 (never can tell) and outside at steering block
5 droop (Guage)
Spool
5.5 ride height
1 wheelbase
Additive on half the tyre


REAR:
3 toe
shocks 4th hole in
2.6 springs
30 wt oil
1.5 degrees camber
roll center standard
5.5mm ride height
4 droop (Guage)
1mm shim at upright
Upper inside link mnt
1 Wheelbase
Additive full width


Skiddins
You're running alot of droop.....hmmm. Does the car feel lazy? I've never run that low on the blocks, maybe it's worth a try if it doesn't cook the tires. I've never had any luck running carpet without the center post (008 or 009), it's good for about 2.5 minutes for me, then it's a twichfest. thanks

Jim
pcar951 is offline