brian here is a small write up on exit steering



INCREASE EXITING STEERING
If you want increased steering exiting the corner with this setup you have a couple of adjustment options. (1) you can move the rear hubs towards the rear of the car. The further you move your rear hubs back will give you more overall steering and less overall rear traction. (2) you can add more .030 washers under the front camber tie rod. This will decrease the camber change as the suspension compresses which gives you more steering when you exit the corner. (3) You can move the front spindles to the "Up" position. This lowers the front ride height which also gives you more exiting steering............. these are three easy adjustments that you can make that will only take a couple of minutes to change and will make a big difference in your exiting steering.