R/C Tech Forums - View Single Post - Serpent to 1/10th EP Touring Kit S400
Thread: Serpent to 1/10th EP Touring Kit S400
View Single Post
Old 01-12-2009, 05:38 AM
  #2706  
sandrixx
Tech Master
iTrader: (5)
 
sandrixx's Avatar
 
Join Date: Aug 2006
Location: SnakeVille
Posts: 1,434
Trader Rating: 5 (100%+)
Default 16t pulley
Originally Posted by jayjayy
FYI, KSCHU is our top driver in our area. He always tries new setups and some sort of "secret tuning" and always stays ahead of the rest of the pack in our place. His setup works...

48 and 64 pitch. Some info that I know of...
Durability = 48P really tough
Quietness = 64P
Smoothness = 64P
Ratio = 64P will gives you finer ratio difference compared to 48P
Calculations of ratio is still the same.

Is anyone having durability problems with the center 16T pulley? I mean it wears out quite fast as compared to other brands. I am think the annodized coating wears out too fast IMO. My local top drive kschu is using 16T pulleys from HB and the wear rate outlast Serpent's at least 2x and works like a dime.
Chu is it right? is it right?? huh huh??
yeeep! I've also notice my 16t pulley wears out fast even if we are only racin 11.5BL's. what more if usin' a faster motor?..anyway,, do you have the part number from HB for the 16tpulley?..much thanksx
sandrixx is offline  
Reply