R/C Tech Forums - View Single Post - Schumacher Corner
View Single Post
Old 09-28-2003, 06:04 PM
  #4683  
Fred Perkins
Tech Champion
iTrader: (264)
 
Join Date: Mar 2002
Location: Pennsauken, NJ
Posts: 5,963
Trader Rating: 264 (100%+)
Default

Originally posted by racerman
hmm, anybody have a good set-up for stock racing on high bite tracks for the mission?
Not sure what setup Latif was running. He ran stock and mod. I just ran Mod. I used Pauls snowbirds setup and ran 26mm 43shore Take off's in the front and 30mm 43shore Take Off's in the rear. Both at 61mm The setup was good. A little loose going into the corners so I used 1/4 paragon on the front and 1/2 paragon in the rear. I would have like to try the 40 multi tires from Take Off but didnt get a chance to. If you would like the setup just e-mail me at [email protected]

As far as the belt's I run a gray shumacher in the front and a standard schumacher soaked in wd40 in the rear. Some people have been using the X-Ray rear belt, but as far as I know the front wont fit.

P.S. Thanks Paul!!!


Fred Perkins is offline