View Single Post
Old 01-01-2009, 12:31 PM
Tech Addict
iTrader: (24)
BrettL's Avatar
Join Date: Nov 2008
Location: Wichita KS
Posts: 629
Trader Rating: 24 (100%+)
Default RTR Storm

Yes to the front cvds. If you're referring to the lower hinge pin blocks that bolt to the chassis, the RTR came with plastic ones 4 or 5 years ago when I bought mine. Then they came out with the Storm Plus RTR, same car, different body choices, engine and radio gear. Blocks were still plastic if I'm not mistaken. If you have aluminum hinge pin holders marked A or B, then those are upgrades that were only available with the Storm Pro kit. I hope those are what you were talking about. They are a good upgrade. The only problem is that if you hit something REALLY hard a just the wrong angle, the bolts sometimes shear off in the aluminum block(roughly $30) instead of just breaking a plastic one($3.99). You have to really hit somithing good to shear a bolt, just keep them tight. If they back out a bit they'll shear more easily. Happy Racing and keep the shiny side up. Brett.
BrettL is offline  
Reply With Quote