Thanks for the information. I appreciate the help, I need it.
Originally Posted by
360rcspeedway
Hi
Yes I have run the 1c lipo with the 1.89 software in a Tekin RS and it runs great. My setup was full timing (30) sensored only mode, with the motor timing at 0.
Your setup sounds good but you will need to run the red wire IN, not out. And turn the car on with the reciever pack, not the speedo. Again make sure you leave the speedo switch in the OFF position when you run the car.
Thats the way I've been running it and have not had an issue.
I hope this helps!
Donny
ps-start with 42/76 with 1.75 tire for track your size.