Originally Posted by
Kenny L
For anyone looking for these uprights part number is COR79299 same as old 2 hinge pin hole upright. I found if you use 2 corally steel shims/washers in inner hole you'll be right where the 2nd hole of old upright is. Also I would suggest ordering camber link COR79262 to make rear link straight off tower. These are a great upgrade and they are way stronger.
Careful when you run the COR79262 in the rear. Use a washer with more surface area to distribute the stress to the tower during side impacts. The longer dimensions acts as a lever and breaks shock towers easier when using the outside holes. I learned this the hard way.
Christopher