Buggy 1.5R
I am running 5-5-2 in the diffs.
shock- big bores, 45wt front-35wt rear with blue springs, 1.3mm pistons
shock position- top hole in front, top in rear on towers, both in inside hole on arm.
wheelbase- long
rear out hinge pin on lower arm in upper hole on are hub
rear anti squat- pins up
rear upper arms- inner center hole on tower, upper outer hole on upright.
Front toe out -2 degrees (going to be that as I have not set it up on hudy yet)
Rear Camber -2 degrees (going to be that as I have not set it up on hudy yet)
No shock spacers on front shocks and 2 medium spacer in rear shocks
Full droop (will be changed after today of racing)