Hi trfracer.
I have the Quantum esc and can't seem to figure out how to load the team factory settings. How do you do this?
Thanks.
Originally posted by trf racer
ok to adjust the punch intial brake etc is a bit more complicated.
hold the mode button down then you should get a flashing green light.this is the punch control
you can check the set value[1-5] by counting the red led flashes [1 flash equals value 1,2 flashes equals value 2 etc.]
you adjust values by pressing setup
press mode button again and this will bethe intial brake again we havesetting 1-5.
press mode again and we have automatic brakes set up [drag brakes]
with 1-5 settings.
on the punch control 1=smooth 5=mega punch
on the intial brake 1=linear 5=progresive
on the drag brakes 0=off 5=strong
default setting is
punch=2
intial brake =2
drag brake=0
hope this helps.