Originally Posted by
bherzog513
What is the suggested needle settings on a the tuned motor, and what comes from the box?
i measured mine last night for another thread ...from the factory my needles were
hsn 3-1/2 turns out from bottom
lsn 6-1/4 turns out from bottom
originally thought i would have to lean it a bunch to get it started ...put only 1-1/2 turns in form factory on the lsn ...and 1/2 turn in from factory on the hsn ....fired right up ...didnt turn the needles a bunch after that ...just for break in ....
Originally Posted by
rstnboy
Which Odonells plug did you use?
i used a 97t medium....after a little more fuel i will probably go to a 77t hot
they work great ....and last a long time
Originally Posted by
r1harper
what size carb insert comes with the non tuned engine..thanks
8mm and amains got it on sale for 219$