Here is the setup that I use at the indoor track that I race at. With 300M
body
-I use foam tyres so not much use to you
-Racer kit + long motor heatsink+
Assoc. B3 ball cups, they are longer and
hold camber settings better after a
knock plus are cheap
-Front
gold springs
50wt oil, standard pistons #2
inner top shock mount hole, std bot.
standard camber link positions
roll bar
0.5deg toe in
1.5deg camber
-Rear
Silver springs
35wt oil, standard piston #2
inner top shock mount hole, std bot
standard camber link positions
roll bar
3deg toe in
1.5deg camber
long wheel base
-Battery in rear position
-4mm ride height
This setup is good enough for me to be points leader with 2 rounds to go.
a tip from my last nights racing, on the fast corners be very controlled and smooth with the steering to keep up corner speed use as little steering as possible