I seem to get less Servo twitching when i punch it instantly, while the battery been used for half the run time.
It seems that the units with less resistant tend to run alot cooler, but thats jsut what observed during the years.
And i am being nitpicky, ... i just like to have low ohms.
Thats how i was tought to shop for 5 years now,
just added the programability option to the recent ESC shopping list.
Never had a Novak. Been a Tekin user, but willing to try out new things =D

I am not sure if this is or not is but...
The Haras Twister 2.1 = KO PROPO VFS-1 C1 | Haras Twister 2.2 = KO PROPO VFS-1 C2

I read it before in other threads, but below are the links to the exact settings if you have a flasher
to match the KO PROPO ECS to any of these driver setting or to your own like a Hotwire from tekin.
http://www.kopropo.com/america/index...d=20&Itemid=58

But i am trying to figure its specs of the cable adapter and figure out if i can build my own adapter for it.

Now the next trick question,

Does any one have that serial port adapter ?
And is willing to take it apart and tell me whats inside the serial port thingy ?

My guts tell be its direct leads to 3 wires that will plug into the ESC.
If any one has this and is from houston let me know...