R/C Tech Forums - View Single Post - JConcepts' Bar Codes - Reverse or Not?
View Single Post
Old 12-12-2008, 09:15 AM
  #3  
avrcguy
Tech Regular
iTrader: (11)
 
avrcguy's Avatar
 
Join Date: Jul 2007
Location: West Des Moines, IA
Posts: 398
Trader Rating: 11 (100%+)
Default

Originally Posted by tdeal823
Your picture does not work!

Anyway The YYY patter is out on the set that I mounted up of the rear of my T4. I was running losi pink tapers all around. on a hard pack track. "FTR in michigan" I cut the outside foam at a small 45 deg angle to fit the tire better and for a more rounded profile.
I noticed more forward bite and about the same side bite on power
Off power it had more side bite.
over all it felt more predictable in the situation I was in.
I have heard that reversing this for the front would give you more steering.
I have not tried this yet. but I have plans on buying a few more gold bar codes to experiment with.
Hope this helps
Thanks for the reply. It would seem that the image host (imageshack) is having trouble. Am I understanding right that so far you have only run them on the rear? If so were you still running your pink tapers up front?

I'm hoping to get to use mine for the first time tomorrow, and I'm trying to decide the best direction to mount the fronts.
avrcguy is offline