R/C Tech Forums - View Single Post - RC10B4/T4 Forum
Thread: RC10B4/T4 Forum
View Single Post
Old 12-09-2008, 10:18 PM
  #6304  
Mr.Maim
Tech Master
iTrader: (36)
 
Mr.Maim's Avatar
 
Join Date: Jun 2006
Location: Phoenix, AZ
Posts: 1,609
Trader Rating: 36 (100%+)
Default

Originally Posted by Davidka
If you run on low traction, larger tracks the "L" series motors can be good. They are like the triple wind version of BL motors. They do sacrafice total power, the 7.5L makes the same wattage as the 10.5 standard version. The 7.5 would have much more revability.

You will also find that BL motors, especailly the milder ones (8.5 through 17.5) like to be geared tall. They actually gain bottom end with taller gearing because they react well to the load. Be careful no to go too far, you will want to watch motor temps.

I run a 10.5 geared 25/81 and that's actually pretty low for that motor.
Thank you very much! That was the kind of info I was looking for!

I'm currently gearing a 10.5 at 26/81 as of last week. Didn't know you could go that high but man what a difference! May go higher tomorrow in club racing.
Mr.Maim is offline