That's a lot of great info on single cell, thanks to the people that spent the time to do this testing
I might have give a single cell a try, since I have a T-bar car a saddle pack is a must. I saw the post about the single 4800mah trak power pack and that seems like a good option plus I could always use it in my off-road stuff if I didn't like it. Looking at the Trak power saddle pack it seems that for use in a 1/10 scale car the two packs would be wired in series so if I used the 3200mah saddle pack and wire the two cells in parallel that will give me 1S2P 6400mah......BB
Trak power 3200 saddle pack Dimensions
L= 71mm
W= 47mm
H= 22mm Weight= 102grams