Originally Posted by
Poinas2
I'd go with the 5p. It's a safe bet as it has plenty of grunt down-low and nice top. 3p is more linear and 7p then has the top with a bit soft bottom. I'd combine the 5p with GO 2047 or the GO 0801 FEMCA pipe
Depends on the track you intend to run the most.
Very tight technical track with moderate straights - 5 port with 0801
More flowing track with moderate to longer straight sections - 7 Port with 053 or 0801
Generral purpose motor with nice linear response - 3 Port with 0801
I have never run the 3 Port, so can't give you an honest appraisel on that motor.
The stock 7 Port is a very nice buggy motor. Ample bottom end for a buggy, and top end to die for. If you are going for a stock motor, this would be my choice in a buggy no question.
Most of the race teams that use the Go engines run modded 5 Ports in their buggies. These modded motors have that mighty 5 port bottom end with extended top end like the 7 port. Pretty much the best of both worlds.
Now your totally confused - right
