R/C Tech Forums - View Single Post - Schumacher Corner
View Single Post
Old 12-28-2001, 01:17 AM
  #902  
Cyberfish
Tech Addict
iTrader: (1)
 
Cyberfish's Avatar
 
Join Date: Dec 2001
Location: Springfield, OR
Posts: 726
Trader Rating: 1 (100%+)
Default

I chewed up the 17t drive pulley tonight on my Mission, and a friend did the same with his Mission the first night he ran it. I was running the car in both stock and mod, with an 11x2 in mod. I looked things over pretty carefully, and everything looks to built correctly, but I could be missing somthing. We are both decent drivers, and I actually was doing quite well with the car, meaning I didn't hit much!

I would also like to have any gearing suggestions for the 20t pulley since that is what I will have to run until the parts come in to the local shop. I seem to be the only one, but I'm running 48 pitch...so on a tight carpet track, with rubber tires, what would be good starting point for stock, and also for a ti can 11x2.


Thanks...

p.s. this is my first post, and judging by what I have seen on here, and the help available, it won't be my last! Great Board!
Cyberfish is offline