R/C Tech Forums - View Single Post - Go-Tech Engines Thread

11-20-2008 | 08:29 PM

#4730

jnc011994

Tech Regular

iTrader: (15)

Joined: Dec 2007

Posts: 432

From: Philippiens

Quote:

Originally Posted by grizz1

Everyone has their favourites. I find the 0801 on the 7 Port gives it wicked bottom end and it still revs out big time (but not quite as much as with the 2047, which is basically a mid to top end pipe).
I have a friend who uses the 2047 pipe with the longer header off the 0801 pipe and swears by this set up.
If you want a really smooth power band with the 7 Port and can run a two chamber pipe under your governing rules, get a Dynamite 053, you will love the results.
As far as 3 chamber pipes go, for me, I find the 0801 is very nice and gives good ecomony too.

Thanks grizz for the info. I would still be using the 2047 (since this is the one i have

) One more thing, i have trouble choosing between a GO .25 6 port with 0801 pipe and OS Engine .28XZ with 2060SC tuned pipe.. i'll be putting it in my CEN Matrix TR. Any input would be most appreciated.

Thanks,
Jojo

Reply