Originally Posted by
lightfoot
.. If anyone has any suggestions or tips on de-tweaking with scales I would love to know... Thanks...
Lightfoot and all
What works well for me is to run all the droop screws down 1 full turn, that will eliminate the springs and sway bars when moving weight around. I also use 2 scales (a small bubble level helps) and one balance pin making it a 3 point operation first. That will allow you to do the back and front separately first. With the sway bars unhooked bring the droop screws back up 1 turn. Do the springs and then hook the sway bar up and set that. (4 Set up wheels makes it more accurate
) then use all 4 scales to finish up and check tweak, I can do mine in 10 min. this way.
I hope that helps