R/C Tech Forums - View Single Post - Mugen MTX-3
Thread: Mugen MTX-3
View Single Post
Old 09-10-2003, 10:44 PM
  #7908  
Fire
Tech Addict
 
Fire's Avatar
 
Join Date: Oct 2001
Location: Vancouver BC Canada
Posts: 703
Default

Originally posted by Corse-R
Some few things that can you help on those tight tracks.

1. Narrow your car. Go to 194 or 195mm and the rear track 1mm narrower than front, this will help you rolling on the turns and be more agile through it.
2. Use higher roll center supports.
3. Probably you will be happy putting less caster (try with the 1mm shim at the front, rest of shims at rear) and more front camber.
4. Check with a thinner rear diff oil, something like 7000.

What do you use at front? diff or one-way?

About the problem of the clutch, probably you're using the Extra hard spring, try the stock one and set your clutch gap to 0.3mm or 0.4mm.
Thanks for your tips man
got them copied down

btw i am using the oneway~
Fire is offline