R/C Tech Forums - View Single Post - Mugen MTX-3
Thread: Mugen MTX-3
View Single Post
Old 09-10-2003 | 10:12 PM
  #7906  
Corse-R's Avatar
Corse-R
Tech Elite
 
Joined: Aug 2001
Posts: 2,121
From: Madrid (Spain)
Default

Originally posted by Fire
man i would love to play on a track that can pratically use breaks

the dump ass who sets up the track here make the lanes and coner so close and so narrow that i rely on momentum to get thru some S coners coz the clutch won't engage at such a slow speed

and unfortunately that's the only track i am able to go to play
Some few things that can you help on those tight tracks.

1. Narrow your car. Go to 194 or 195mm and the rear track 1mm narrower than front, this will help you rolling on the turns and be more agile through it.
2. Use higher roll center supports.
3. Probably you will be happy putting less caster (try with the 1mm shim at the front, rest of shims at rear) and more front camber.
4. Check with a thinner rear diff oil, something like 7000.

What do you use at front? diff or one-way?

About the problem of the clutch, probably you're using the Extra hard spring, try the stock one and set your clutch gap to 0.3mm or 0.4mm.
Corse-R is offline