Originally Posted by
The Wease
I'm not sure if the Xray springs will work . I tried HPI/ Hara springs and they were to long and I couldn't get my ride height down. I use Kfactory springs kits K4902,K4903. I know Corally spring work also. If your Xray springs are under 24mm long they should work.
Mike
Originally Posted by
Marcos.J
use the bottom shock collar for the tc5 so you can get the correct ride height.
If you use the bottom shock retainers for the TC5 ( see the picture above) then you can use Tamiya, X-ray,Associated ,HPI springs and still have the correct ride height.