R/C Tech Forums - View Single Post - RC10B4/T4 Forum
Thread: RC10B4/T4 Forum
View Single Post
Old 10-31-2008, 11:28 PM
  #5936  
Jason Pelletier
Tech Champion
iTrader: (33)
 
Jason Pelletier's Avatar
 
Join Date: Jul 2007
Location: New York
Posts: 8,834
Trader Rating: 33 (100%+)
Default

Originally Posted by ffejrobins30
I say just go ahead and keep all the FT Carbon stuff on there and if you need to add weight, use stick-on wheel weights from 1:1 cars. That way you can add the weight where you need/want it and can control the weight in 1/4 oz.(7 gram) increments for the most part. I had to install 1 1/2 oz of weight to my B4 to get it past tech with a stock motor and reedy 3200mAh LiPo. The awesome thing was that I could add the weight just under the rear shock tower and under the front upper plate. It handles rough stuff well and has tons of steering. Just my $0.02.
+1

anyway aluminum tweaks i had aluminum mounts on my lazer and i took them off after i noticed one looked alittle off and the car is so much better. There are some things best kept simple. unfortunately in racing thats the best way for the most part.

you want bling i suggest b44 rear hubs, qc rears, aluminum shock bushings, Ti screws and a aftermarket lid.
Jason Pelletier is offline