Originally posted by Taylor-Racing
I think I noted before that I became completely befuddled by the rear shocks.
page 20 and 21 show conflicting positions for the lower mounting. I guessed that some of the pic's may have been carried over from the RR manual, but never actually having an RR, I'm speculating. Anyway, I couldn't get the car down anywhere near a reasonable ride height, so I used the shorter ends, set the shafts to 12mm and used the upper holes on the arms - this works fine. There is also a chance of the roll bar touching the shocks if using the lower hole on the arm, on our car. I guess I should get the full rear sway bar set, eh?
Hear is something thats kind of weird I had this problem with the front I followed the directions to the T and when its all said and done I had around 8-9mm ride height in the front
I readjusted the shock collers to get the height down, now the front doesnt seem as stiff as it did before. I do go with heavier spring.