Not at all,
Rustler VXL
stock motor (Velineon 3800kv I think).
Xcelorin LOS9515 ESC
HECELL 25C 5000mah 3s1p pack
original transmitter and receiver
23/76 gearing
The ESC is set to:
0% drag
40% brake
no limit throttle (i've set this to all settings)
forward/pause/reverse
reverse rotation is selected (the motor was going in reverse when I wired everything. This seems to be a common problem. I followed A to A, B to B and C to C.
Lipo 3s 9V cuttoff
Initial Accel is set to high, (i've tried every setting in this group)
Motor timing is set to high (i've tried every setting in this group)
deadband is set to 3, i've tried 4
My transmitter is set to legacy as I do not have a 2.4GHz system yet.
I read somewhere that setting the ESC to nimh no voltage cutoff fixes the problem. I just gave it a shot and the car seems to be receiving the correct power now but the red light still blinks and the car doesn't respond very quickly.
Last edited by brianmiller; 10-20-2008 at 08:14 AM.