Originally posted by Manfredo
want to run it with rubber tires on asphalt.
Has anyone experience with spools ?
Hey Manfredo, yes I run modified with a spool, and i am running the 2 degrees kickup=the front the front A-Arm is at a positive 2 degree angle,
I worked well...
The above, with
.5 degrees tow out in front,
1.5camber all the way around,
6 front droop(number on droop gauge)
4 rear droop,
2 degrees rear anti-squat(front of rear a arm is at positive 2 degree angle)
2 degrees rear toe-in,
0 degree caster block,
shortest wheelbase possible,
30 wt. oil all around,
number 2 pistons all around,
silver springs on rear with upper position on middle hole and lower position on out side hole
gold springs in front with upper position on out side hole and lower position on outside hole,
front inner camber link set at upper and inner hole
rear is same
outer camber link is at factory settings,
and yes that was with the FRONT shock tower on the front, i am next going to try the rear on the front with the blue spring set-up
Gearing was at 72/20 with 10x1 on a medium sized track (about 120x60)
Have fun,