R/C Tech Forums - View Single Post - Hot Bodies Cyclone
View Single Post
Old 10-14-2008, 12:17 PM
  #14116  
cyclone speed
Tech Addict
 
cyclone speed's Avatar
 
Join Date: Jun 2008
Posts: 621
Default

Hi , i have discussed this alot with Korey and he told me to go to 1mm shim under front toe block and keep 1.5 under rear toe block , and it gave me more steering .Id recomend you to try this.

Also if its a low grip try to run 2mm under front camber link and 1mm under rear camber link , try to have 1mm difference between front and rear.It helped alot because i hade my rear end a litle loose but know its fixed.

try and put the 1.5 front toe block it would help abit with steering in the midle and exit.

Most important is are you running the pink spring.I used to have gold in front but know i have pink and MY GOD alot more steering.

So i would first try 1mm under front toe block , then change to pink spring and then move to 1.5 toe block and finally try 1mm difference between front and rear camber links.
Hope that helps
cyclone speed is offline