drksyde
you are right the engine is 2100kv and the pinion is a 16
the instructions suggests a 13
will have to call losi tom for this

I installed an airtronics servo and had to put 2 spacers instead of one
put in a spectrum reciever and charged the battery, took 70 mins to finish at about 16.7v with a hyperion charger, the balancer does not fit the losi balance tabs
1.8 x 1.9 x 6.3in are the dimensions of the losi pack
The ESC was supposed to be in the default 2 setting but when I checked mine it was in the 3 (5S) setting
there is minimal cogging at the start of the throttle curve but after 1/8 throttle it is smooth and a beast, I have noticed it is not as sensitive or accurate as the 1/10 ESC where you can start the car slow
brake is supposed to be 20% but stops on a dime
will post more info soon