R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 09-08-2008 | 06:30 PM
  #4291  
MassiveMods's Avatar
MassiveMods
Tech Master
 
Joined: Jan 2006
Posts: 1,977
From: Sydney
Default

Originally Posted by herb99
Ran my .25 Go in a truggy on the weekend and it ran great.
Something I noticed at the end of the 6 minute heats was there was a slight hesitation on stand still to take off, as though there was a delay of fuel going to the carb for a split second.
The tune was perfect, 3 second pinch test and good trail of smoke on the top end. Temps around the 115c or 230f range. Motor has done 3 litres of fuel (3/4 of a gallon).
I can't work out what could be causing the hesitation.
Any ideas?
Thanks
Check your plug
Pipe seals and tank seal
If that dosent work richen your LSN 2/8
MassiveMods is offline