R/C Tech Forums - View Single Post - 1/12th scale surges
View Single Post
Old 08-23-2008, 11:17 AM
  #2  
boyntoncyclone
Tech Adept
 
Join Date: Aug 2008
Location: Boynton Beach, Florida
Posts: 163
Default

1st step, get all your wires up off the carbon fiber chassis, make sure your antenna has a clear route, not all jumbled up with the other wires. Also check to make sure all the shrink wrap on your batts are good, bare batteries touching carbon fiber chassis is bad. Try these two first and see if that clears it up.
boyntoncyclone is offline