R/C Tech Forums - View Single Post - lipo compared to nimh?
View Single Post
Old 08-05-2008 | 06:57 AM
  #30  
Bulldawg RC's Avatar
Bulldawg RC
Tech Master
iTrader: (65)
 
Joined: Feb 2007
Posts: 1,947
Default

Originally Posted by nutz4rcyktw
I run Lipos in stock and mod classes. A really good NIMH may have more punch for about 30 to 45 seconds then they start to drop off. Lipo doesn't drop off. I run classes that have weight limits and must add weight to offset for the lighter Lipo. The Lipos still out perform NIMH. In addition, you can run the same batt and don't need a box full that you must charge, discharge, cycle, tray and then find they have dropped performance in a short time. Remember that a matched pack is matched for a very short time of use and then no longer are closely matched.

I have run an Orion 3200 in stock and Orion 4800 in mod for over a year and each is still balanced within .0001 volt without the use of a balancing charger, but I checked them at least every two weeks. Each performs like they did the first time I used them.
+1, except i balance everytime i charge. why not? it doesn't take any longer.

When i ran nimh, they were EP4600 that were excellent matched cells with great numbers. The punch i got out of those batteries was ridiculous but it only lasted for a minute. Having that initial punch threw off my driving style. With Lipo it is constant power throughout which is very nice. its smooth sailing all the way through the race. I personally prefer lipo but i must admit that weight adjustments will need to be made. Run what you brought and make sure you get atleast the required time for the race.
Bulldawg RC is offline