R/C Tech Forums - View Single Post - Sirio engines thread
Thread: Sirio engines thread
View Single Post
Old 08-01-2008 | 03:31 AM
  #2343  
rcabj's Avatar
rcabj
Tech Elite
iTrader: (1)
 
Joined: Feb 2004
Posts: 4,682
From: johor, west malaysia
Default
Originally Posted by Vasilis
Hi guys

I'm running an EVO4 STI with the 2611 pipe on my NT1 and I'm having a small problem with run time.
I cant get more than 3,5 minutes out of a tank.
The engine runs at around 120 celsius.
I'm using Tornado 16%.
Also I changed the carb for the EVO3 STI as with the stock one the engine was untunable.

Vasilis
its quite hard to indicate what is the coz..you should at least get a minimum of 5-6 minutes runtime per tank

i suggest u check
1.your centax spring tension. maybe not enough tighten
2.your low needle
3.your main needle
4. also your idling should not be too high.
rcabj is offline  
Reply