Originally Posted by
sachoppers
I Have a hot bodies truggy and buggy..both with rapid left front tire wear, center to inner tire wear.
There both set up about the same...-2.0 camber front and rear, +2.0 rear toe,-2.0 front toe..both front and rear arms lvl.
Any Ideas what i could set different.
The clue here is center to inner tire wear. Its a coming out of a turn symptom.
Or a straight away symptom. To much Neg camber with a lot of wheel spin will do this.
Center to out side tire wear will be from powering into a turn.
Make sure you droop in the front are the same am the rear are the same. Finding the setting is s trick takes lots of trial and error with lot of documenting results.
Take the tires off and put some thing under the chassis so the a-arms are not touching the surface and make sure they are the the same measurement.
They don't all four need to be the same just left to right front and back.
I let my a-arms drop till they hit the chassis. But to much chassis roll can cause what your experiencing. Good luck be sure to have a pro at your track check it as well.
GO FAST AND TRY NOT TO CRASH.!