Originally Posted by
G87z
If I am correct it on the top of page 4 in this thread. It was said to remove the .1 MM shim and have it shimmed at .2mm for the 16% nitro content.
I'm sure if you read it correctly, he's asking about the oil content (%) not head shims, and i think that they should be shimmed to .4mm for 16% nitro anyway, unless the shimming is different on the tuned version than the Evo 2 and 3
aussies1129 where using 5% castor 5% syn in our 16% on the East Coast (well most of the guy's i race with anyway
)