Thread: HPI Pro 3
View Single Post
Old 12-13-2001, 04:59 AM
  #201  
sosidge
Tech Elite
 
sosidge's Avatar
 
Join Date: Dec 2001
Location: Bristol, UK
Posts: 3,886
Default

My old carpet setup (sorry about the tamiya springs)

Body: Protoform Stratus
Motor p2k on about 29/81 or peak 12x1 on about 21/81
GMV12 speedo
KO 713 FET servo
Integy Sanyo 3000's

Front:
Blue Jaco foams (24mm)
Blue tamiya springs (stiff)
40wt oil
6deg caster blocks
Camber links in upper outboard hole, and upper inner inboard hole
Camber set for even tyre wear, erring on the negative side.
Toe in - about 1 deg.
All other settings as kit

Rear
Blue TRC foams (supposedly a little softer)
Blue tamiya springs
60wt oil
Camber links in upper outboard hole and upper inner inboard hole
Camber set for even tyre wear, erring on the negative side
Toe in 1deg (stock motor), 2deg (mod motor)
All other settings as kit

Other info:
Fibre-lyte top-deck fitted
shock bladders fitted
various other little tweaks that don't really do anything

Hope this helps - it's set up to turn in hard, and be responsive through chicanes.
sosidge is offline  
Reply With Quote