i would just like to say i love my go engine but what i dont like is the carb i have the sport 3 port and the carb was a tuning nightmare the motor would run great and then lean bog on the bottom so after reading all the different posts on here i sealed up the needles with green slime ran a tank and lean bog still richened the bottom a half turn great smoke for a minute then leaned out richened another half turn great smoke and power for a minute then leaned out so i swapped the carb with the one from my os motor and it runs reliable and great holds a tune and i could not be happier i would just like to know were do you get the correct low speed needle if in fact i may have gotten one of the bad ones as i would like to make the carb that came with my motor work with my motor


Thanks