R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 06-23-2008 | 10:44 PM
  #3343  
grizz1's Avatar
grizz1
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by 1fastguy1
stock setting for the go 5 port??? anyone anyone....
I relize this is probably a little farther back on the pages but jsut wondering if anyone happens to know what they are
thanks
MO
HSN flush and LSN 1 1/2 turns in from flush will get you running every time. This is always a good starting setting if you loose the tune completely for some reason.
Lean the LSN from here until you get a nice steady idle and you will be sweet.
LSN will probably end up about 2 1/2 turns in from flush, maybe a little more for full race tune depending on fuel, pipe etc. HSN you don't want to go more than about 2 hours in from flush. Go's like a fat top end and a lean bottom end
grizz1 is offline