corvettecrazy;
There should be one Washer on EACH side of the Roller Bearing on the Clutchbell with HPI Cars (supplied in the Kit).
The inner Washer keeps the Clutchbell from rubbing on the Flywheel, the outer Washer keeps it from coming off. You can add some thin Shims on either side to take up any extra slop if you want. Lightly re-lube the Clutch Bearing/Roller after every few HOURS of runtime.
If the Clutchbell rubs on the Flywheel, the Car/Truck WILL Glitch, absolutely.
Last edited by popsracer; 08-03-2003 at 10:04 AM.