Originally posted by Ah10
Went to Revelation this afternoon, car is running really good, front sway bar is good too! with front sway bar initial turn is so quick and precise I had to slow down the servo a bit to adapt.
Here is my set up for today.
Front
Camber 1 degree
Toe 0 degree
Mugen Light Blue Spring
Ride Height 5mm
Sway Bar Soft Setting
Ellegi 26mm 40sh
Rear
Camber 2 degree
Toe 2 1/2 degree
Mugen Light Blue Spring
Ride Height 6mm
Rear sway Bar, 3mm from the end
Ellegi 26mm 40sh
Front oneway, Kawahara Neg Diff.
Traction was wonderful but wear on rear tires are a little bit too much, after like 8 tanks of gas rear tire is gone, and front still have 2/3 left may be even more!
Tried Yokomo 26mm and 32mm Firm last week, it works great!
I will try 45sh on the rear next week.
Hey Manticore, my rear tires still wear out like a ice cream cone, more wear on the outter edge do you know why?? already change to stiffer spring to eliminate some body roll but still not wearing off evenly! Should I go 2 1/2 rear Camber?
you need to adjust your camber so that you foam tire dont get cone anymore.