R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 06-09-2008 | 11:07 PM
  #3099  
RETRO RC's Avatar
RETRO RC
Tech Addict
 
Joined: Jan 2007
Posts: 715
From: AUCKLAND NEW ZEALAND
Default

Originally Posted by HaulinBass
12 litres is like four gallons your metal pinch should be gone.
Did you perhaps screw in the LSN with the carb closed?
close 12 ltrs = 3 gallons

Depending on how you've been running the engine you can still have pinch at 12 ltrs I know because my 1st 7 port still had pinch at around 10 ltrs.

Jesusaves what i meant was did the revs increase quite a bit or only slightly before cutting out they should only increase very slightly

I would probably try leaning the LSN by about 2-3 hours and richen the HSN by the same and see how you go also check to see what your Idle gap is like should be around 1mm no more

Adrian
RETRO RC is offline