R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 06-05-2008 | 04:40 AM
  #3044  
vti-chris's Avatar
vti-chris
Tech Master
iTrader: (3)
 
Joined: Jan 2005
Posts: 1,069
From: Cyprus
Default

Make sure you are not having any air leaks.
Check for any fuel("fresh") on the engine after 3-4 tanks and try to spot the leak.
All carbs are different...some need 1/4th increments some need only 1/12th.
My previous OS required 1/12th adjustments at the HSN and 1/8th-1/4th at LSN.
The GO requires 1/8th-1/12th for both LSN and HSN adjustments.

These are for fine tuning.If you are way off then go with 1/8th and 1/4th.
vti-chris is offline