Originally Posted by wingman2

Hi guys, I thought I'd put a couple of pics of a 12th car design that I am working on at the moment. This is the first stage of the design, so it is n't anything totally differant to anything else out there at the mo. It uses a AE front end and a modified Trinity rear end for now but I am working on a new front and rear end which will be added later. The main features of the chassis is that is has been milled out under the t-bar. This lowers the roll centre of the rear end but can be brought back to the normal level by putting a washer under each pivot. I was aware that there was less material around that area of the chassis I made the cross brace fit at 5 differant points to try and add a bit more stiffness back to the chassis. I wanted to gauge some feedback from you guys if you don't mind, once the front end has been built, I will of course, stick some more pics on here, the same goes for the rear end, which incidently, should be something 'out of the ordinary' if all goes to plan! Cheers guys, Chris.