Originally Posted by
mojoman
Danny,
Great Planes makes a hi power adapter for the equinox p/n-gpmm3185. I would be curious to know if this helps with the low amperage problem that I experience in the interface mode with the equinox. From what I hear it charges through the balance leads as well as the discharge leads. As soon as my 4000s come in I will check it out.
Peace,
Casey
When I tried to use the Equinox with the regular harness using a 3 amp charge which is what the balance connectors are rated for I was getting to much resistance thus the voltage my charger was seeing was about .40 volts higher.
You can make your own high power adapter using the harness that came with the Equinox. Where the harness has the male connetor which is the connector where you plug in the Lipo balance connector just cut the outer red and outer black wires. These are the 2 power wires which you can put your favorite connector and then plug into the Lipos power leads and use the Equinox in link mode and it will work well.