Originally Posted by
cherokee180c
I have a problem with my carb on my 7 port turbo. I tried to pull it out to seal it with permatex, but when I unscrewed the pinch bolt, the carb would not pull straight out. I then started to twist it back and fourth, but it still never came out. Now it is loose, but only twists and does not wiggle side to side, even when I tighten up the pinch bolt. How can I get the carb out and then get it to tighten up properly. Right now I have had to put silicone all around it to try and stop it from twisting.
I couldnt get mine out as well, i had to remove the black clamp things in the crankcase where the screw goes into, screw the bolt in a little from the wrong side and pull it and the black thing will come out then push the other one out, then it came out easy